| Modem |
| RF Channel Data Rate: |
256kbps or 512kbps |
| Bit Error Rate: |
< 1x10-6 @ -102 dBm Max |
| Collision Avoidance: |
Trio’s unique ChannelShare™ collision avoidance system |
| Radio |
| Frequency Range: |
902-928 MHz Region Specific Versions Available |
| Tx Power: |
User configurable 0.01 to 1W (+30 dBm) in 0.5 dB steps |
| Protection: |
TX over-temperature and reverse power protection. (VSWR) |
| Modulation: |
4 Level GFSK |
| Network Management |
| Configuration: |
All configuration via embedded HTML interface (HTTP, HTTPS & console) |
| Diagnostics: |
Compatible with Trio TVIEW+ Diagnostics for stand alone network management. |
| Firmware: |
Local and Remote Field upgradeable Flash memory |
| Interface |
| Ethernet: |
Dual RJ-45 Bridging IEEE 802.3 Ports with MDI/MIDX (auto-detecting) interface |
| Serial: |
DB-9 Female - Dual 3-wire TxD/RxD RS-232 Serial Ports plus CTS/RTS |
| Configuration Port: |
Either Ethernet Port can be used for diagnostics, configuration and re-programming |
| Antenna: |
Dual TNC female bulkhead. Separate connectors for LinkXtend™ or separate TX/RX antennas. |
| Power: |
2 pin locking, mating connector supplied |
| LED Display: |
Multimode Indicators for Pwr, Tx, Rx, Sync, LAN 1 & LAN 2 (Link and Act) |
| Ethernet |
| Ethernet Ports: |
Dual 10/100 Mbps (auto-sensing) compliant with IEEE 802.3 |
| Protocols: |
Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT) |
| Terminal Server: |
Legacy RS-232 serial support via embedded terminal servers (UDP/TCP). |
| DHCP Modes: |
Auto and Manual NTP: SNTP Client/Server Time Synchronization Support |
| Security |
| Encryption: |
256-bit AES encryption* |
| HTML Interface: |
HTTPS Password Protected |
| Trusted Unit: |
Optional Trusted Access point-Trusted Remote operation. |
| General |
| Temp Range: |
-40ºC to + 70ºC |
| Humidity: |
95% @ 40oC (104oF) non-condensing |
| Power Supply: |
10-30 Vdc (13.8 Vdc nom) |
| Transmit Current: |
800 mA nom @ 1W |
| Receive Current: |
<150mA nom Sleep Mode: Multi-level smart sleep modes |
| Dimensions: |
Rugged Diecast Enclosure 100 x 34 x 165mm (4.0 x 1.4 x 6.5 inches) |
| Mounting: |
Integrated Mounting Holes Weight: 0.5kg (1.1lbs.) |
| Compliances |
| Compliances |
FCC PART 15
IC RSS210
ACA AZ/NZS 4268
CSA Class I, Division II, Groups (A,B,C,D) for Hazardous Locations ANSI/UL equivalent |